Setting Posts The process of setting posts for a vinyl lattice fence is much the same as that of any other kind of fence. After you've determined the layout of the fence, begin by setting the end and corner posts. Posts should be set in holes with about one-third of the post's height below ground, and the base of the post should rest on a 6-inch layer of gravel at the bottom of the hole. Hollow posts should be set in holes that are pre-filled with concrete, and the post should be tapped into the hole to make sure the inside of the post is filled with concrete.

After the end and corner posts are set and checked for plumb, a string stretched between them will serve as guide for setting the intermediate posts. Adjusting Panel Width It's unlikely the distance between all the posts in your fence will be the exact width of the prefabricated fence panels. You can adjust the width of panels to fit between narrowly spaced posts and maintain the appearance of the lattice, but you must plan your modifications carefully. If the space to be filled is small, you can cut a panel on both ends with a fine-bladed saw, removing the end board details, so that the panel is the necessary size. After you've made the cuts, attach the rails to the brackets just as you would with an unmodified panel. Xyplorer Scripts S. If the fence style includes vertical boards as well as lattice, make cuts only between the vertical boards. Preserving End Boards Modifying a panel to decrease its width while preserving the end board detail is a more complicated process.

Lattice comes in 4’ x 8’ sheets. It is cut in the shop to accommodate the selected fence style. After completing the installation of the rails and pickets, place. Lattice fence panels can be useful for many purposes. They can hide imperfections in a yard, screen areas that you don’t want to display, provide privacy and. Begin installing a vinyl lattice fence by first deciding where the fencing will go, installing it one panel at a time, cementing the posts into place and making sure.